How to Choose the Right Types of Lubricants and Oils for Bicycle Chains

A lubricant for a bicycle chain, a chain lubricant or oil is a crucial point in the maintenance of a bicycle. This ensures that the moving parts of the chain move smoothly, preventing abrasion or rusting of the chain, making driving less awkward and more comfortable.

If you find that the chain makes a rattling sound, does not move as easily between the devices as before, or if you notice rust, it’s time to lubricate the chain.

Different types of bicycle oils are available for different weather and driving conditions – find what you need!

Always clean the chain before using the lubricant. This removes dirt and debris, allowing lubrication where it is needed.
On clean, degreased and dried chain you can use only a few lubricants. Read the instructions for use to ensure this.
Chain lubricants work on all types of bicycles, including road, mountain, and normal city bicycles.

Dry chain lubricant

Best for dry and dusty conditions.

If the road is dusty and dry, the lubricant should not be sticky. It attracts all the dust and adheres to the chain. These are the conditions under which dry lubrication is suitable. It is a liquid form, covers the chain and then dries. So your chain does not sticky when touched.

Important Information: Be sure to clean and remove any traces of wet oil before using a dry lubricant. Apply several coats and let them dry, ideally several hours. Use this type of lubricant regularly, preferably before each ride.

Wet Bicycle Oil

Best for wet conditions.

Wet grease for high humidity. It is designed to remain attached to the chain in rain, heavy rain, puddles, and dirt. You must use this lubricant if you are traveling a lot in the fall, spring and winter.

Important Information: As in the previous case, it is ideal to clean, degrease and dry the chain. Do not use this grease in dry and dusty environments as it attracts large amounts of dirt and sticks to the chain! Use a dry lubricant for such conditions.

Ceramic Bicycle Grease

Best for dry conditions with minimal moisture.

Ceramics oils are a high-tech dry lubricant. They have the smallest ceramic microparticles that cover the chain and lubricate the moving links. These lubricants are slightly more expensive than conventional ones but make for a much quieter and more relaxed ride.

Important Information: Only use lubricants for grease and dry chains.​ Review the instructions, but it may be better to keep a few layers several times to give the lubricant time to dry before traveling.

Wax Bicycle Grease

Ideal for all environmental conditions – from dry to wet.

Another option among dry chain lubricants is wax for lubrication, which spreads like a liquid on the chain until it hardens. This is even a less dirty option than dry lubrication but should be used more often, although this depends on the conditions of the journey and how far and how often you drive.

Important Information: In addition to other dry lubricants, this should be applied to the degreased and dried chain. Leave the bike for a few minutes after applying the grease before starting. This fat should be used more frequently than dry or wet fat.

Green Bicycle oil

Best suited where it is important to be environmentally friendly.

More and more companies are producing bicycle chain lubricants and oils that are environmentally friendly. They are based on herbal ingredients and/or harmless ingredients instead of petrochemicals. You can buy the full range of the above-mentioned lubricants (dry, wet, wax, etc.) from various types of green oil in the store.

the degreased and dried chain. Leave the bike for a few minutes after applying the grease before starting. You should use this more frequently than dry or wet fat.

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

One Response

Leave a Comment